HDPE/LDPE/LLDPE/PVC/EVA Geomembrane Welding Machine for Plastic Membrane Film Liners Welder

• Customization: Available
• Application: Household Appliances, Garden Supplies, Decoration, Commodity, Auto Part, Electronic, Stationery
• Cooling Way: Air Cooling
• Model NO.: GW600
• Control: Semi-Automatic
• Frequency Range: Low Frequency
• Electric Current: AC
• Style: Handheld
• Power: Electric
• Transport Package: Aluminium Packing Box
• Specification: GW800,
• Trademark: OBOR
• Origin: Taian, Shandong, China
• HS Code: 8515809090
• Production Capacity: 10/Day

Product Description

       Geomembrane Extrusion Welding Machine-GW600
 1.Geomembrane Welding machine description:
This geomembrane extrusion welder is the first one in China that has functions of double independent heating systems, digital display controller, 360-degree rotating welding head, motor cold start protection,  which is applicable to welding PE,PP,PVDF and other hot melt materials.
2.Geomembrane Welder Technical parameter:
 

Voltage	220 V ± 5%
Frequency	50/60Hz
Metabo Extruding Power	1100W
Hot Air Power	1600W
Welding Rod Heating Power	800W
Air Temp	20-600°c Adjustable
Extruding Temp	200-300°c Adjustable
Welding Speed	2.5Kg/h
Welding Rod DIA	3.0mm-4.0mm
Weight	7.0Kg
Application	PP PE

3.Main components

 

4.Operation procedures

1) Put the welding gun on the shelf, install the handle, plug in the mains plug.
2) Open the control box switch, welding temperature is generally set at 300 ° C, when the temperature reach 270 ° C, the motor switches off, you can not start, when the temperature reaches 270 ° C, the motor switch is turned on, you can start properly. Open the hot air machine power switch, thermostat knob, heated a few minutes to operate.
(3) The right hand pull the motor switch, the motor starts to rotate. The new machines have noise, probably It mostly is relevant to the resonance between the tool and the base or the close of the parts inside the tool.If the motor is very smooth, and the internal sound disappears after sending welding rods.
4) It is better to re-standby 5 to 6 minutes after ensuring the motor can be started.Then put welding rod into machine to operate. Adjust the temperature  carefully depending on the thermoplastic case.
5)Motor's rotating speed is fast without thermoplastic and will become heavier when sending welding rod, if become very difficult, please stop, probably screw heating time is too short or low temperature.

5.Package:

Box Size: 585mm×500mm×190mm
Weight: 13kg
6.Application

 

Shandong OBOR New Materials Co., Ltd
Taian. Shandong. China